Albany Creek, Queensland, Australia
1300 799 115
07 3882 2933

Yeastar S-Series Multicast Paging

Yeastar has announced a new firmware version (30.8.0.8) is now available for S-Series VoIP PBX. In this new version there are 3 new features, including the robust Multicast Paging feature to deliver an easier instant audio broadcasting solution and multiple optimisations and bug fixes for the API interfaces, SIP trunks and others to increase the system usability.

NEW FEATURES

Multicast Paging

Easily and quickly broadcast instant audio announcements to phone users who are listening to the configured multicast IP address and channel. (Note: The IP phone should support multicast paging feature.)

  • Added support for monitoring status of dynamic agents
  • Added email template for Voicemail to Email and Fax to Email

OPTIMISATION

Security
  • Improved the security of web login.
  • Improved the security of SSH login.
Extensions
  • Deleted the Name setting, added Caller ID name setting. Generally, set Caller ID name to the user’s name.
  • Fixed the issue that All Busy Mode for SIP Forking setting didn’t take effect if the extension had a DOD number.
  • Fixed the compatibility issue with Vtech IP phone: TLS extension could not be registered.
SIP Trunks
  • Added Outbound Parameters to configure SIP parameters for outbound calls.
  • Added Transfer Parameters to configure SIP parameters for transferred calls.
  • Supports up to 64 DID numbers.
Jitter Buffer
  • The path of Jitter Buffer settings are changed to Settings-> PBX-> General -> Jitter Buffer.
  • Added support for choosing which extensions and trunks to apply jitter buffer settings.
  • Added support for configuring the Adaptive Adjustment Size of jitter buffer.
API Interfaces
  • Added support for sending API reports to an absolute path of the third-party software.
  • Added support for querying, downloading, and deleting voicemail files.
  • Optimised the Hotel Wake-up Service
  • And six more (check here for details).
Storage
  • Optimised Network Drive settings: If the configurations are incorrect, the system will prompt the cause of the error.
  • Optimised FTP sharing: when you enable FTP sharing, the system will prompt you to enable FTP service; when you disable FTP sharing, the system will prompt you that the FTP sharing is enabled.
  • Fixed the Network Drive issue: If a mounted network drive was disconnected then automatically mounted again, the PBX could not recognise the network drive.
Event Center

For more details and optimisation relevant to firewall, operation log, prompt and CDR, please refer to the release notes. Download the firmware here or check for this update in your S-Series VoIP PBX Web interface.

Related Posts

Leave a comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.